Avery Dennison Power Stacker Instrucciones de operaciones descargar pdf (Pagina 23)

TROUBLESHOOTING

This section helps you correct some problems that may occur.

Problem Action

Stacker Full Empty the tray. Press Clear to clear the

error and resume printing.

The stacker may not be plugged into an

outlet. Verify the power connection.

Stacker Jam Clear the jam. Press Clear to clear the

error and resume printing.

If the jam is not inside the stacker, check

inside the knife or printer.

Stacker does not work. Make sure the stacker is plugged into an

outlet and is fully connected to the

printer.

Tags are stacked loosely. Empty the tray. Turn the adjustment knob

to a lower setting.

Adjust the guide rails and tag stop to the

width and length of the tags.

Tags are stacked too tightly. Empty the tray. Turn the adjustment knob

to a higher setting.

Troubleshooting 3-1

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Sin comentarios

Avery Dennison Power Stacker Instrucciones de operaciones Pagina 23