Avery Dennison Label Printer Manual de instrucciones descargar pdf (Pagina 31)

Setting the Ribbon

If you are using thermal direct supplies, do not load a ribbon and set the ribbon option to

No. If you are using thermal transfer supplies, load a ribbon and set the ribbon option to

Yes. If you are using high energy supplies (TUFF-MARK®), load a high energy ribbon and

set the ribbon option to High Energy. See "Using a High Energy Ribbon

" for more

information.

To change the setting, from the Main Menu, select Setup, then Supply. Then, follow

these steps.

1. Press  or  until you see Ribbon.

CHANGE BACK

Yes

Ribbon →

SUPPLY

2. Press CH

ANGE to highlight the ribbon options. The current setting is shown.

3. Press  or  to scroll through the ribbon options.

SET CANCEL

Yes →

Ribbon

SUPPLY

4. W

hen you see the ribbon option you need, press SET to save the change. Press

CANCEL to leave the ribbon option unchanged.

5. Press BACK until you return to the Home/Online screen.

Yes

CHANGE BACK

SUPPLY

Ribbon →

Note: If you

choose Yes, install a ribbon before printing. If you choose No, do not

install a ribbon before printing. If you choose High Energy the printer displays

the warning message, “High Energy ribbon can damage the printhead”. Press

ENTER to clear the warning.

Setting Supply Options 4-3

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 115 116

Sin comentarios

Avery Dennison Label Printer Manual de instrucciones Pagina 31