Avery Dennison Label Printer Manual de instrucciones Pagina 33

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 116
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 32
Setting the Speed
You can change the print speed for bar codes or graphics. If you select "default", formats
with serial bar codes automatically print at 2.5 ips and formats with parallel bar codes
print at 6.0 ips.
Note: If you change the speed, you must resend your formats or turn the printer off and
back on before the change takes effect.
To change the setting, from the Main Menu, select Setup, then Supply. Then, follow
these steps.
1. Press or until you see Speed.
CHANGE BACK
Default
Speed
SUPPLY
2. Press CH
ANGE to highlight the speed options. The current setting is shown.
3. Press or to scroll through the speed setting options.
SET CANCEL
2.5 IPS
Speed
SUPPLY
4. Wh
en you see the speed option you need, press SET to save the change. Press
CANCEL to leave the speed option unchanged.
5. Press BACK until you return to the Home/Online screen.
SUPPLY
Speed
2.5 IPS
CHANGE BACK
Setting Supply Options 4-5
Vista de pagina 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 115 116

Comentarios a estos manuales

Sin comentarios